Schedule
August 29, Tuesday
8:30 - | Registration | |
Room-A | ||
9:20 - 9:40 | Opening Ceremony | |
9:40 - 10:30 | Keynote Lecture 1 | |
10:30 - 10:40 | Coffee Break | |
10:40 - 11:30 | Keynote Lecture 2 | |
11:30 - 11:55 | Group Photo | |
11:55 - 12:45 | Lunch | |
12:45 - 13:15 | See Exhibition | |
Room-A | Room-B | |
13:15 - 15:00 | Session 1-A: | Session 1-B: |
Design Codes and Bridge Engineering 1 | Steel Structures 1 | |
15:00 - 15:15 | Coffee Break | |
15:15 - 17:00 | Session 2-A: | Session 2-B: |
Design Codes and Bridge Engineering 2 | Steel Structures 2 | |
18:15 - | Reception @ AOI NAPOLI in TENNOJI | |
August 30, Wednesday
Room-A | ||
9:00 - 9:50 | Keynote Lecture 3 | |
9:50 - 10:40 | Keynote Lecture 4 | |
10:40 - 10:55 | Coffee Break | |
Room-A | Room-B | |
10:55 - 12:10 | Session 3-A: | Session 3-B: |
Composite Structures 1 | Steel Structures 3 | |
12:10 - 13:00 | Lunch | |
13:00 - 13:30 | See Exhibition | |
13:30 - 14:45 | Session 4-A: | Session 4-B: |
Composite Structures 2 | Vibration and Monitoring | |
14:45 - 14:50 | Short Break | |
14:50 - 16:05 | Session 5-A: | Session 5-B: |
Advances in Bridge Engineering and Technologies 1 | Fatigue 1 | |
16:05 - 16:20 | Coffee Break | |
16:20 - 17:35 | Session 6-A: | Session 6-B: |
Advances in Bridge Engineering and Technologies 2 | Fatigue 2 (Composite & Steel Structures) | |
Room-A | ||
17:40 - 18:00 | Closing Ceremony | |
19:30 - | Banquet @ MIYAKO CITY OSAKA TENNOJI | |
Presentation time: 12min
Discussion time: 3 min
Session 1-A
13:15-15:00
Design Codes and Bridge Engineering 1
Chair:
Consideration of Imperfections with Temperature Differences Measurement of Sections at the Thulba Viaduct
Nadine Thomas, Martin Mensinger, Joseph Ndogmo
Fundamental Study on the Behavior of Curved Box Girder Bridge Subjected to Temperature Change
Kyogo Nakayama, Masahide Matsumura
Reliability Assessment of Existing Concrete Bridges with Geometrical NDT Re- sults Case Studies
Stefan Ku¨ttenbaum, Thomas Braml
Development of Fast-Setting UHPFRC for Bridge Deck Overlay
Shunji Aoki, Takayoshi Tomii, Jun Homma, Koji Tamataki
Isogeometric Analysis of Bridge Structures: State of the Art and Potential Ad- vantages
Florian Zimmert, Leo Lapidus, Josef Kiendl, Thomas Braml
Verification of Soundness Judgement of RC Slabs by FWD
Hiroki Akamatsu, Masaya Tsukamoto, Satoshi Tada, Hiroshi Higashiyama
Numerical Study on the Influence of Corrosion Damage on Reaction Force at the Support of a Steel Box Girder Bridge
Yuga Shutoku, Yasuo Kitane, Kunitomo Sugiura, Yoshinao Goi, Iksong Kim, Yasuo Hanaoka, Nobuhito Okubo
Session 1-B
13:15-15:00
Steel Structures 1
Chair:
Analytical Study on the Influence of the Misalignment of the Bottom Flange Joint of a Box Girder on the Tightening Axial Force and Slip Strength
Jianpeng Lai, Takashi Yamaguchi
Epoxy Coated Strands for International Stay Cable Applications
Jannik Gawlista, Werner Brand
Experimental Study on Slip Load and Clamping Force Relaxation of Frictional High Strength Bolt Connection with Entire Corrosion
Ming Li, Renchao Xie, Lingbo Yao
Slip Tests of Double-lap Joints Consisting of Non-projected and Sandglass-shaped Bolts with High Strength and Durability
Masashi Takayama, Hitoshi Moriyama, Masayori Yoshimi, Takashi Yamaguchi, Gen Hayashi
Noise Reduction of Modular Expansion Joints on the Example of the New Pattullo Bridge(CAN)
Torsten Ebert, Christian Braun, Toshihisa Mano
Study on Load-carrying Capacity of Built-up Column Lost Lacing Bars Focused on Buckling Mode
Kenta Morimoto, Toshikazu Takai, Takao Miyoshi, Kaname Iwatsubo, Kazuya Tamada
Numerical Study of Stiffened Plates Joined By Thermal Spraying
Eitaro Horisawa, Kunitomo Sugiura, Yasuo Kitane, Yoshinao Goi
Session 2-A
15:15-17:00
Design Codes and Bridge Engineering 2
Chair:
LT Bridge - a New and Fast Construction Method for Cost Efficient Bridge Struc- tures
Franz Untermarzoner, Michael Rath, Johann Kollegger
Fast Erection of Deck Slabs for Steel-concrete Composite Bridges
Johann Kollegger, Franz Untermarzoner, Michael Rath
Shin-Meishin Expressway Where Bridge Construction Progresses
Yoshinori Wada, Joon-Ho Choi, Takafumi Omura, Shinya Hiraoka, Moeka Tokutsu, Masafumi Udo
The Arnulfpark Bridge - Glass As Contact Protection and Design Element
Barbara Siebert, Tobias Herrmann
Structural Design of Glass-Elements in Bridge-Constructions
Alexander Pauli, Geralt Siebert
The Use of Glass for Bridges - Basics,Special Questions, Codes and Application Examples
Geralt Siebert
Fiber Distribution Pattern Recognition in UHPFRC Based on Deep Learning Technology
Xin Luo, Takashi Matsumoto
Session 2-B
15:15-17:00
Steel Structures 2
Chair:
A Fundamental Study on Application of Two-dimensional Hermitian Elements to In-plane Bending Deformation Problems of Plates
Tsukushi Okabe, Masaki Sakai, Naoki Kaneko, Kyosuke Yamamoto
Experimental Investigation on Corrosion Deterioration in Defective Areas of Paint-coated Steel
Feng Jiang, Kazuki Ojima, Mikihito Hirohata
Analytical Study on Transferred Load of Friction-Bearing Hybrid Joints with Mechanical Bearing Blind Rivet Bolts
Masataka Komura, Takashi Yamaguchi
Energy Absorption of Bolted Patch Plate Repaired Member in Ultimate Behavior
Souta Masudome, Toshikazu Takai
Corrosion Assessement of Weathering Steel Bridges in Osaka and Wakayama Prefectures (Japan)
Thandar Wint, Shen Hui, Testuya Iida, Nobuto Okubo, Yasuo Hanako, Yasuo Kitane, Kunitomo Sugiura
Evaluation of Debonding of CFRP bonded onto Steel Plate by AE Method
Morimune Mizutani, Toshiyuki Ishikawa, Yoshimichi Fujii
Study on Relationship between Whole Displacement and Bearing Deformation of Bolt Holes in High-Strength Frictional Bolted Joints
Zice Qin, Hitoshi Moriyama, Takashi Yamaguchi
Session 3-A
10:55-12:10
Composite Structures 1
Chair:
Building Bridges with Thin Walled Semi-precast Concrete - Elements Experi- mental Torsional Investigations
Michael Rath, Franz Untermarzoner, Johann Kollegger
Proposal on Rigid Connection between Steel Deck Plate Girder and RC Abut- ment in Replacement Project
Yasuo Tawaratani, Naomitsu Akashi, Mikinao Goto, Osamu Ohyama, Yusuke Imagawa
Innovative developments of composite columns with high-strength steels
Michael Sch¨afers, Rudolf Roess, Martin Mensinger
Precast Modular Bridge Structures - Current Developments Pilot Projects and Experimental Investigations
Oliver Fischer, Nicholas Schramm
Analytical study on the mechanical behavior of the intermediate support in the composite structure using bearing plates
Kenta Nakaoka, Takashi Yamaguchi, Satoshi Kimura, Taro Tonegawa
Session 3-B
10:55-12:10
Steel Structures 3
Chair:
Slip Behavior Between Cast Iron Deck Module and Steel Main Girder Using High Strength Bolted Frictional Joints with Slotted Hole
Yugo Shirai, Takashi Yamaguchi, Ryo Yamashita, Hironobu Tobinaga
Sufficient Choice of Steel Material for Bridge Bearings to Avoid Brittle Fracture
Bertram Kuehn, Natalie Hoyer
MAURER Uplift Spherical Bearing
Toshihisa Mano, Christian Braun, Torsten Ebert
Significance of Treating Initial Imperfection in FE Simulation for Compressive Behavior of Welded Steel Structural Members
Yuxuan Cheng, Shuhei Nozawa, Mikihito Hirohata
Evaluation of Load Capacity of Temporary Bridges Using End-plate Connections under Pure Bending Moments: A Proposal for a Simplified Calculation
Ruoxi Li, Yu Chen, Isao Matsuda, Hirotoshi Azuma, Takashi Yamaguchi
Session 4-A
13:30-14:45
Composite Structures 2
Chair:
Bond Behavior of CFRP Plates with Tapered Ends for Steel Structure Reinforce- ment
Shunta Sakurai, Yuya Hidekuma, Kazuo Ohgaki, Yoshiaki Okui
The Effect of Prestressing on the Shear Capacity of Post- tensioned Concrete Beams
Sebastian Lamatsch, Oliver Fischer
Crack Prevention Methods of PRE-flexed Beam Prefabricated By Segmental Method
Hiroaki Fujibayashi, Naoki Noro, Shota Tsuzi, Osamu Ohyama, Shigeyuki Matsui
Imaging of Ultrasonic Echo Measurements for Reconstruction of Technical Data of Bridges – Possibilities, Limitations and Outlook
Stefan Maack, Ernst Niederleithinger
Effect of Fire Damage on Residual Prestress and Load Carrying Capacity of Pretensioned Prestressed Concrete
Dennise -, Yasuhiro Mikata, Susumu Inoue
Session 4-B
13:30-14:45
Vibration and Monitoring
Chair:
Study of a Monitoring Plan and Behavior Analysis to Verify the Performance of an Integrated Column By Multiple Steel Pipes
Shinsuke Akamatsu, Masahiro Hattori, Yasumoto Aoki, Yoshiki Taniguchi, Kunitomo Sugiura
Application of Bridge Weigh in Motion on a Bridge with Prestressed Concrete Girders
Marcel Nowak, Oliver Fischer
Natural Frequency of Lightweight Foamed Concrete Composite Slabs (LFCCS)
Zainorizuan Mohd Jaini, Sugiura Kunitomo, Sakhiah Abdul Kudus
Geo-referenced localisation of SHM sensors on new bridge construction based on the example of the digital bridge Schwindegg
Johannes Wimmer, Thomas Braml
Standardisation in Structural Health Monitoring (SHM) - a Concept Proposal
Thomas Braml, Johannes Wimmer, Fabian Seitz, Max Spannaus
Session 5-A
14:50-16:05
Advances in Bridge Engineering and Technologies 1
Chair:
Improving Damage Prediction By Assessing Structural Damage Through Sensor Measurements in Combination with Virtual Building Models
Nathalie Nießer, Geralt Siebert
“SmART Strand” Prestressing Steel Strand with Optical Fiber Sensor for Tension Monitoring
Masashi Oikawa, Shinji Nakaue, Naoki Sogabe, Michio Imai
Use of data from BIM Method for new and existing concrete bridges - Practical report and possible improvements
Christian Kainz, Gertraud Wolf
Study on Damage Detection of Simply-supported Bridges Using Structural Re- sponses of Girder Ends
Phyoe W. Hein, Yoshinao Goi, Yasuo Kitane, Kunitomo Sugiura
Reuse of Structural Steel Products
Christoph Ehrenlechner, Christina Radlbeck, Martin Mensinger
Session 5-B
Fatigue 1
Chair:
14:50-16:05
Analytical Study on the Reinforcement of Intersections Structure in Orthotropic Steel Deck By U-rib Cutting Method
Qihang Shen, Takashi Yamaguchi
Steel Castings in Infrastructure Projects
Max Spannaus, Sven Nagel
An Investigation on Prevention of Weld Root Fatigue Crack by Assistance with Adhesive Bonding
Yifei Xu, Mikihito Hirohata, Jiahao Mao
Crack Propagation Calculations with Scattering Material Parameters for the As- sessment of Welded Bridges
Dorina Siebert, Christina Radlbeck, Martin Mensinger
Experimental investigation of the ultra-low-cycle-fatigue (ULCF) behaviour of full-scale steel components
Sergey Chernyshov, Andreas Taras
Session 6-A
16:20-17:35
Advances in Bridge Engineering and Technologies 2
Chair:
Real-Time Damage Assessment of Bridge Structures Based on Reduction of Nat- ural Freqeuency Under Amibent Vibration Measurement
Khuyen Trong Hoang, Hiroyuki Uchibori, Naoki Nagamoto
Influence of the Longitudinal Reinforcement Ratio of Prestressed Beam Elements on the Development of Strain and Compression Softening in the Cracked Web Sebastian Thoma, Oliver Fischer
A Simulation Model for Heating Correction on I-Shaped Welded Steel Bridge Members
Xiaoyu Guan, Mikihito Hirohata, Satoshi Mukawa, Seiji Okada
Development of a Temperature Model for Small-sized Box Girders
Malik Ltaief, Martin Mensinger
Experimental Study of Sound-based Hammer Test on Composite Structure
Yiran Yu, Kunitomo Sugiura, Yoshinao Goi
Session 6-B
16:20-17:35
Fatigue 2 (Composite steel structures)
Chair:
Fatigue Analysis of RC Slab Repaired with Early-Age Ultra-High Performance Fiber Reinforced Concrete
Amatulhay Pribadi, Takashi Matsumoto
Wheel Running Fatigue Test for Steel Plate-concrete Composite Deck Using Pe- culiar Shape Ribs with Multi-functional Projections
Kozo Iwata, Risa Katsuki, Shota Nakagawa, Shigeyuki Matsui, Hiroshi Higashiyama
Experimental Fatigue Test on Historic Railroad Bridge
Fabian Seitz
Lifetime Fatigue Reliability Analysis Considering Different Distribution Types
Mohamed Zied Mili, Kunitomo Sugiura, Yasuo Kitane